RFD PADS

SMOOTH FACE RFD PADS

These pads are made from proprietary thermoplastic rubber compounds that provides consistent properties over a wide range of temperatures.  They are ideal pads for general purpose applications using resin fiber discs with grits 36 and finer .  All pads are for discs with 7/8” holes except #151300 and #151296 are for 5/8” arbor hole discs.  Nut pads are included. 

EDP #	KOLTEC  PAD	DIAM	ARBOR	FLEX	RPM
151298	336-ST-5	4"	5/8-11	Medium	15,000
151300	491-ST-M102	4"	M10x1.25	Medium	15,000
151296	491-ST-M105	4”	M10x1.5	Medium	15,000
151330	339-ST-3	4½"	3/8-24	Medium	13,000
151302	339-ST-5	4½"	5/8-11	Medium	13,000
151332	339-ST-M14	4½"	M14	Medium	13,000
151304	335-ST-5	5"	5/8-11	Medium	12,000
151305	335-ST-M14	5"	M14	Medium	12,000
151306	309-ST-5	7"	5/8-11	Medium	8,500
151312	420-SF-5	7"	5/8-11	Soft	8,500
151308	326-ST-5	9"	5/8-11	Medium	6,600

RIBBED FACE RFD PADS

Ideal for coarse grit grinding and most general purpose applications.  A good pad for stainless steel sanding.  Recommended with grits 36 and coarser. Nut pads are included.

EDP #	KOLTEC  PAD	DIAM	ARBOR	FLEX	RPM
General purpose for light applications
151294	525-VC-5	4”	5/8-11	Firm	13,000
151342	707-VC-5	4½”	5/8-11	Firm	13,000
151338	708-VC-5	5”	5/8-11	Firm	12,000
151344	721-VC-5	7”	5/8-11	Firm	8,500
Heavy duty glass reinforced for severe applications
151314	707-HL-5	4½”	5/8-11	Firm	13,000
151340	707-HL-M14	4½”	M14	Firm	13,000
151316	708-HL-5	5”	5/8-11	Firm	12,000
151336	708-HL-M14	5”	M14	Firm	12,000
151318	721-HL-5	7”	5/8-11	Firm	8,500
151320	527-HL-5	9”	5/8-11	Firm	6,600

SPIRUB RUBBER PADS FOR RFD 

Download a printable version of the products on this page

Download the 2014 Koltec USA Catalog

Back to top